Last updated: Fri, 05 Sep 2008

imagecopyresampled

(PHP 4 >= 4.0.6, PHP 5)

imagecopyresampled — 再サンプリングを行いイメージの一部をコピー、伸縮する

説明

bool imagecopyresampled ( resource $dst_image , resource $src_image , int $dst_x , int $dst_y , int $src_x , int $src_y , int $dst_w , int $dst_h , int $src_w , int $src_h )

imagecopyresampled() は、イメージの矩形の部分を別のイメージにコピーします。同時にピクセル値を滑らかに補間を行い、このため、特にサイズを小さくした場合には鮮明さが維持されます。

言い換えると、imagecopyresampled() は src_image の座標 (src_x ,src_y ) にある幅 src_w 、高さ src_h の矩形領域を受け取って、それを dst_image の座標 (dst_x ,dst_y ) にある幅 dst_w 、高さ dst_h の矩形領域に配置します。

コピー元とコピー先の座標、幅、高さが異なる場合には、適当なイメージ伸縮が行われます。座標は、左上を基準とします。この関数は、同じイメージ内の領域にコピーする場合にも使用可能です (dst_image が src_image と同じ場合) が、領域が重なる場合の結果は予測できません。

パラメータ

dst_im: コピー先の画像リンクリソース。
src_im: コピー元の画像リンクリソース。
dst_x: コピー先の x 座標。
dst_y: コピー先の y 座標。
src_x: コピー元の x 座標。
src_y: コピー元の y 座標。
dst_w: コピー先の幅。
dst_h: コピー先の高さ。
src_w: コピー元の幅。
src_h: コピー元の高さ。

返り値

成功した場合に TRUE を、失敗した場合に FALSE を返します。

例

例1 単純な例

この例は、イメージをオリジナルの半分のサイズに再サンプルします。


<?php
// ファイル
$filename = 'test.jpg';
$percent = 0.5;

// コンテントタイプ
header('Content-type: image/jpeg');

// 新規サイズを取得します
list($width, $height) = getimagesize($filename);
$new_width = $width * $percent;
$new_height = $height * $percent;

// 再サンプル
$image_p = imagecreatetruecolor($new_width, $new_height);
$image = imagecreatefromjpeg($filename);
imagecopyresampled($image_p, $image, 0, 0, 0, 0, $new_width, $new_height, $width, $height);

// 出力
imagejpeg($image_p, null, 100);
?>

上の例の出力は、たとえば以下のようになります。

例2 イメージを均等に再サンプルする

この例は最大の幅もしくは高さが 200 ピクセルのイメージを表示します。


<?php
// ファイル
$filename = 'test.jpg';

// 最大の高さ・幅を設定します
$width = 200;
$height = 200;

// コンテントタイプ
header('Content-type: image/jpeg');

// 新規サイズを取得します
list($width_orig, $height_orig) = getimagesize($filename);

$ratio_orig = $width_orig/$height_orig;

if ($width/$height > $ratio_orig) {
   $width = $height*$ratio_orig;
} else {
   $height = $width/$ratio_orig;
}

// 再サンプル
$image_p = imagecreatetruecolor($width, $height);
$image = imagecreatefromjpeg($filename);
imagecopyresampled($image_p, $image, 0, 0, 0, 0, $width, $height, $width_orig, $height_orig);

// 出力
imagejpeg($image_p, null, 100);
?>

上の例の出力は、たとえば以下のようになります。

注意

注意: パレットイメージの制限(255+1色)による問題があります。カラーの再サンプリングやフィルタリングには通常は255色以上の色が必要となります。再サンプルするピクセルとその色を計算するためにある種の近似計算が使用されます。パレットに新しい色を割り当てようとして失敗すると、(理論的に)最も近い色が選択されます。それは必ずしも常に可視色とは限りません。そのため、空白(あるいは不可視な)といった不可思議な結果がもたらされます。この問題を回避するには、imagecreatetruecolor()で生成されるようなTrueカラーイメージを目的のイメージとして使用してください。

参考

imagecopyresized()

imagecopyresized

imagecopymergegray

Last updated: Fri, 05 Sep 2008

add a note User Contributed Notes
imagecopyresampled

crash
12-Aug-2008 10:49


The suggestion of converting a gif to a png to retain transparency was useful. However the steps used to maintain the transparency work for a gif as well, so the conversion step is not necessary. Just do everything the same, and save as a gif anyway. i.e.



<?php

$g_iw is new image width

$g_ih is new image height



$img_src=imagecreatefromgif($g_srcfile);

$img_dst=imagecreatetruecolor($g_iw,$g_ih);



//preserve alpha

imagecolortransparent($img_dst, imagecolorallocate($img_dst, 0, 0, 0));

imagealphablending($img_dst, false);

imagesavealpha($img_dst, true);

imagecopyresampled($img_dst, $img_src, 0, 0, 0, 0, $g_iw, $g_ih, $g_is[0], $g_is[1]);



imagegif($img_dst, $g_dstfile); 

imagedestroy($img_dst); 

?>

swizec at swizec dot com
17-Jul-2008 06:20


Wrote a function for sanitising user uploaded images. It saves the native image in size roughly 800x600 so it still fits on most screens when opened, makes a desired size thumbnail and turns all images into high quality jpegs for smaller bandwidth use.



Thumbnails are made in a similar way a designer would make them in photoshop, first resize the most troublesome dimension to desired size, then crop the rest out so the image retains proportions and most of it ends up in the thumbnail.



<?php 



// $image is $_FILES[ <image name> ]

// $imageId is the id used in a database or wherever for this image

// $thumbWidth and $thumbHeight are desired dimensions for the thumbnail

function processImage( $image, $imageId, $thumbWidth, $thumbHeight )

{

    $type = $image[ 'type' ];

    $galleryPath = 'images/collection/';

    

    if ( strpos( $type, 'image/' ) === FALSE )

    { // not an image

        return FALSE;

    }

    $type = str_replace( 'image/', '', $type );

    $createFunc = 'imagecreatefrom' . $type;

    

    $im = $createFunc( $image[ 'tmp_name' ] );

    

    $size = getimagesize( $image[ 'tmp_name' ] );

    

    $w = $size[ 0 ];

    $h = $size[ 1 ];

    if ( $w > 800 || $h > 600 )

    { // we make sure the image isn't too huge

        if ( $w > 800 )

        {

            $nw = 800;

            $nh = ceil( $nw*($h/$w) );

        }elseif( $h > 600 )

        {

            $nh = 600;

            $nw = ceil( $nh*($w/$h) );

        }

        

        $im2 = imagecreatetruecolor( $nw, $nh );

        imagecopyresampled( $im2, $im, 0, 0, 0, 0, $nw, $nh, $w, $h );

        imagedestroy( $im );

        

        $im = $im2;

        $w = $nw;

        $h = $nh;

    }

    

    // create thumbnail

    $tw = $thumbWidth;

    $th = $thumbHeight;

    $imT = imagecreatetruecolor( $tw, $th );

    

    if ( $tw/$th > $th/$tw )

    { // wider

        $tmph = $h*($tw/$w);

        $temp = imagecreatetruecolor( $tw, $tmph );

        imagecopyresampled( $temp, $im, 0, 0, 0, 0, $tw, $tmph, $w, $h ); // resize to width

        imagecopyresampled( $imT, $temp, 0, 0, 0, $tmph/2-$th/2, $tw, $th, $tw, $th ); // crop

        imagedestroy( $temp );

    }else

    { // taller

        $tmpw = $w*($th/$h );

        $imT = imagecreatetruecolor( $tmpw, $th );

        imagecopyresampled( $imT, $im, 0, 0, 0, 0, $tmpw, $h, $w, $h ); // resize to height

        imagecopyresampled( $imT, $temp, 0, 0, $tmpw/2-$tw/2, 0, $tw, $th, $tw, $th ); // crop

        imagedestroy( $temp );

    }

    

    // save the image

    imagejpeg( $im, $galleryPath . $imgid . '.jpg', 100 );

    imagejpeg( $imT, $galleryPath . $imgid . '_thumb.jpg', 100 );

}



?>

mattura gmail com
20-May-2008 02:53


Here's a little function I wrote to resize images to a maximum dimension - based on what facebook does in the galleries. You put in a source, destination and a maximum dimension in pixels (eg 300), and for example if the image is long and thin, the longest edge will be 300px, yet the image retains proportions. A square image will become 300x300, a 6x4 (landscape) will become 300x200, a 4x6 (portrait) - 200x300 etc.

It works on jpg images, but other formats can easily be added.

<?php

function createThumb($spath, $dpath, $maxd) {

 $src=@imagecreatefromjpeg($spath);

 if (!$src) {return false;} else {

  $srcw=imagesx($src);

  $srch=imagesy($src);

  if ($srcw<$srch) {$height=$maxd;$width=floor($srcw*$height/$srch);}

  else {$width=$maxd;$height=floor($srch*$width/$srcw);}

  if ($width>$srcw && $height>$srch) {$width=$srcw;$height=$srch;}  //if image is actually smaller than you want, leave small (remove this line to resize anyway)

  $thumb=imagecreatetruecolor($width, $height);

  if ($height<100) {imagecopyresized($thumb, $src, 0, 0, 0, 0, $width, $height, imagesx($src), imagesy($src));}

  else {imagecopyresampled($thumb, $src, 0, 0, 0, 0, $width, $height, imagesx($src), imagesy($src));}

  imagejpeg($thumb, $dpath);

  return true;

 }

}

?>

bobbyboyojones at hotmail dot com
19-Mar-2008 04:41


I hated that enlarging an image resulted in giant pixels rather than a smoother look, so I wrote this function.  It takes longer, but gives a much nicer look.



<?php



function imagecopyresampledSMOOTH(&$dst_img, &$src_img, $dst_x, $dst_y, $src_x, $src_y, $dst_w, $dst_h, $src_w, $src_h, $mult=1.25){

    // don't use a $mult that's too close to an int or this function won't make much of a difference



    $tgt_w = round($src_w * $mult);

    $tgt_h = round($src_h * $mult);

    

    // using $mult <= 1 will make the current step w/h smaller (or the same), don't allow this, always resize by at least 1 pixel larger

    if($tgt_w <= $src_w){ $tgt_w += 1; }

    if($tgt_h <= $src_h){ $tgt_h += 1; }

    

    // if the current step w/h is larger than the final height, adjust it back to the final size

    // this check also makes it so that if we are doing a resize to smaller image, it happens in one step (since that's already smooth)

    if($tgt_w > $dst_w){ $tgt_w = $dst_w; }

    if($tgt_h > $dst_h){ $tgt_h = $dst_h; }



    $tmpImg = imagecreatetruecolor($tgt_w, $tgt_h);



    imagecopyresampled($tmpImg, $src_img, 0, 0, $src_x, $src_y, $tgt_w, $tgt_h, $src_w, $src_h);

    imagecopy($dst_img, $tmpImg, $dst_x, $dst_y, 0, 0, $tgt_w, $tgt_h);

    imagedestroy($tmpImg);



    // as long as the final w/h has not been reached, reep on resizing

    if($tgt_w < $dst_w OR $tgt_h < $dst_h){

        imagecopyresampledSMOOTH($dst_img, $dst_img, $dst_x, $dst_y, $dst_x, $dst_y, $dst_w, $dst_h, $tgt_w, $tgt_h, $mult);

    }

}



?>

arnar at netvistun dot is
17-Mar-2008 03:58


A small thumb script. Lets you specify max height and width. The thumb will always be of a rectangular shape while the image itself retains it's proportions. Very clean.



<?php

// The file

$filename = 'a.jpg';



// Set a maximum height and width

$width = 80;

$height = 80;



$thumbsize = 80;



// Content type

header('Content-type: image/jpeg');



// Get new dimensions

list($width_orig, $height_orig) = getimagesize($filename);



$ratio_orig = $width_orig/$height_orig;



if ($width/$height > $ratio_orig) {

   $width = $height*$ratio_orig;

} else {

   $height = $width/$ratio_orig;

}



// Resample

$image_p = imagecreatetruecolor($thumbsize, $thumbsize);

$image = imagecreatefromjpeg($filename);

imagecopyresampled($image_p, $image, -($width/2) + ($thumbsize/2), -($height/2) + ($thumbsize/2), 0, 0, $width, $height, $width_orig, $height_orig);



// Output

imagejpeg($image_p, null, 100);

?>

rayg at daylongraphics dot com
07-Mar-2008 07:45


Here's a simple function to resample one JPEG imagefile to another while keeping aspect ratio of the source within the destination's dimensions. You can also tune the allowable distortion if you end up making too many thumbnails with thin blank areas around them. Should work when enlarging images too. Function returns true if it worked, false if not.



function resample_picfile($src, $dst, $w, $h)

{

    // If distortion stretching is within the range below,

    // then let image be distorted.

    $lowend = 0.8;

    $highend = 1.25;



    $src_img = imagecreatefromjpeg($src);

    if($src_img)

    {

        $dst_img = ImageCreateTrueColor($w, $h);

        /* if you don't want aspect-preserved images 

to have a black bkgnd, fill $dst_img with the color of your choice here. 

        */



        if($dst_img)

        {

            $src_w = imageSX($src_img);

            $src_h = imageSY($src_img);



            $scaleX = (float)$w / $src_w;

            $scaleY = (float)$h / $src_h;

            $scale = min($scaleX, $scaleY);



            $dstW = $w;

            $dstH = $h;

            $dstX = $dstY = 0;



            $scaleR = $scaleX / $scaleY;

            if($scaleR < $lowend || $scaleR > $highend)

            {

                $dstW = (int)($scale * $src_w + 0.5);

                $dstH = (int)($scale * $src_h + 0.5);



                // Keep pic centered in frame.

                $dstX = (int)(0.5 * ($w - $dstW));

                $dstY = (int)(0.5 * ($h - $dstH));

            }

            

            imagecopyresampled(

                $dst_img, $src_img, $dstX, $dstY, 0, 0, 

                $dstW, $dstH, $src_w, $src_h); 

            imagejpeg($dst_img, $dst); 

            imagedestroy($dst_img);

        }

        imagedestroy($src_img);

        return file_exists($dst);

    }

    return false;

}

RandomFeatureRequest
03-Mar-2008 12:51


If anyone felt like implementing Bicubic Sharper and/or Bicubic Smoother, that would seriously rock.

wm at violet dot bg
21-Feb-2008 06:16


This is a fixed version of ImageCopyResampledBicubic posted by liviu.malaescu

The original version wasn't respecting src_x & src_y args



<?php

    function ImageCopyResampledBicubic(&$dst_image, &$src_image, $dst_x, $dst_y, $src_x, $src_y, $dst_w, $dst_h, $src_w, $src_h)  {

        // we should first cut the piece we are interested in from the source

        $src_img = ImageCreateTrueColor($src_w, $src_h);

        imagecopy($src_img, $src_image, 0, 0, $src_x, $src_y, $src_w, $src_h);



        // this one is used as temporary image

        $dst_img = ImageCreateTrueColor($dst_w, $dst_h);



        ImagePaletteCopy($dst_img, $src_img);

        $rX = $src_w / $dst_w;

        $rY = $src_h / $dst_h;

        $w = 0;

        for ($y = 0; $y < $dst_h; $y++)  {

            $ow = $w; $w = round(($y + 1) * $rY);

            $t = 0;

            for ($x = 0; $x < $dst_w; $x++)  {

                $r = $g = $b = 0; $a = 0;

                $ot = $t; $t = round(($x + 1) * $rX);

                for ($u = 0; $u < ($w - $ow); $u++)  {

                    for ($p = 0; $p < ($t - $ot); $p++)  {

                        $c = ImageColorsForIndex($src_img, ImageColorAt($src_img, $ot + $p, $ow + $u));

                        $r += $c['red'];

                        $g += $c['green'];

                        $b += $c['blue'];

                        $a++;

                    }

                }

                ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img, $r / $a, $g / $a, $b / $a));

            }

        }



        // apply the temp image over the returned image and use the destination x,y coordinates

        imagecopy($dst_image, $dst_img, $dst_x, $dst_y, 0, 0, $dst_w, $dst_h);



        // we should return true since ImageCopyResampled/ImageCopyResized do it

        return true;

    }

?>

Michael Shepanski
15-Jan-2008 03:09


Here is a function I thought I would share that will resample and copy an image with rounded corners.



<?php

/** ------------------------------------------------------------

 * Copy and resample an image with rounded corners.

 * ----------------------------------------------------------- */

function imageRoundedCopyResampled(&$dstimg, &$srcimg, $dstx, $dsty, $srcx,

                                   $srcy, $dstw, $dsth, $srcw, $srch, $radius) {

    # Resize the Source Image

    $srcResized = imagecreatetruecolor($dstw, $dsth);

    imagecopyresampled($srcResized, $srcimg, 0, 0, $srcx, $srcy,

                       $dstw, $dsth, $srcw, $srch);

    # Copy the Body without corners

    imagecopy($dstimg, $srcResized, $dstx+$radius, $dsty,

              $radius, 0, $dstw-($radius*2), $dsth);

    imagecopy($dstimg, $srcResized, $dstx, $dsty+$radius,

              0, $radius, $dstw, $dsth-($radius*2));

    # Create a list of iterations; array(array(X1, X2, CenterX, CenterY), ...)

    # Iterations in order are: Top-Left, Top-Right, Bottom-Left, Bottom-Right

    $iterations = array(

        array(0, 0, $radius, $radius),

        array($dstw-$radius, 0, $dstw-$radius, $radius),

        array(0, $dsth-$radius, $radius, $dsth-$radius),

        array($dstw-$radius, $dsth-$radius, $dstw-$radius, $dsth-$radius)

    );

    # Loop through each corner 'iteration'

    foreach($iterations as $iteration) {

        list($x1,$y1,$cx,$cy) = $iteration;

        for ($y=$y1; $y<=$y1+$radius; $y++) {

            for ($x=$x1; $x<=$x1+$radius; $x++) {

                # If length (X,Y)->(CX,CY) is less then radius draw the point

                $length = sqrt(pow(($cx - $x), 2) + pow(($cy - $y), 2));

                if ($length < $radius) {

                    imagecopy($dstimg, $srcResized, $x+$dstx, $y+$dsty,

                              $x, $y, 1, 1);

                }

            }

        }

    }

}

?>

matt1walsh DESPAMMER gmail dot com
20-Nov-2007 12:15


None of the stuff I've seen for resizing transparent GIFs works consistently and yields a good image. The hack I thought of is silly, but it works okay -- convert GIF to PNG. This worked for me.



$g_iw is new image width

$g_ih is new image height



$img_src=imagecreatefromgif($g_srcfile);

$img_dst=imagecreatetruecolor($g_iw,$g_ih);



//preserve alpha

imagecolortransparent($img_dst, imagecolorallocate($img_dst, 0, 0, 0));

imagealphablending($img_dst, false);

imagesavealpha($img_dst, true);

imagecopyresampled($img_dst, $img_src, 0, 0, 0, 0, $g_iw, $g_ih, $g_is[0], $g_is[1]);



imagepng($img_dst, $g_dstfile); 

imagedestroy($img_dst);

Dave McCourt
12-Nov-2007 10:32


This function is taken from lots of web sources so thanks to all for posting. It creates square or landscape thumbnails from .jpgs  from either portait or landscape original images. I decide in advance which way I want the thumbs to display for consistency. I usually sharpen the images as well post-upload, to save on server resources. I can post this code if anyone wants it. I hope this helps someone...



    # create thumbnails from jpgs

    # usage:

    # create_jpgthumb(uploaded file, final file (with path), thumb height, thumb width, jpg quality, scale thumb (true) or fixed size (false); 

    function create_jpgthumb($original, $thumbnail, $max_width, $max_height, $quality, $scale = true) {

        

        list ($src_width, $src_height, $type, $w) = getimagesize($original);

        

        if (!$srcImage = @imagecreatefromjpeg($original)) {

            return false;

        }



        # image resizes to natural height and width

        if ($scale == true) {

                        

            if ($src_width > $src_height ) {

                $thumb_width = $max_width;

                $thumb_height = floor($src_height * ($max_width / $src_width));

            } else if ($src_width < $src_height ) {

                $thumb_height = $max_height;

                $thumb_width = floor($src_width * ($max_height / $src_height));

            } else {

                $thumb_width = $max_height;

                $thumb_height = $max_height;

            }



            if (!@$destImage = imagecreatetruecolor($thumb_width, $thumb_height)) {

                return false;

            }

            

            if (!@imagecopyresampled($destImage, $srcImage, 0, 0, 0, 0, $thumb_width, $thumb_height, $src_width, $src_height)) {

                return false;

            }

                        

        # image is fixed to supplied width and height and cropped

        } else if ($scale == false) {

        

            $ratio = $max_width / $max_height;

                

            # thumbnail is landscape

             if ($ratio > 1) {

             

                # uploaded pic is landscape

                if ($src_width > $src_height) {



                    $thumb_width = $max_width;

                    $thumb_height = ceil($max_width * ($src_height / $src_width));

                    

                    if ($thumb_height > $max_width) {

                        $thumb_height = $max_width;

                        $thumb_width = ceil($max_width * ($src_width / $src_height));

                    }



                # uploaded pic is portrait

                } else {

                

                    $thumb_height = $max_width;

                    $thumb_width = ceil($max_width * ($src_height / $src_width));

                    

                    if ($thumb_width > $max_width) {

                        $thumb_width = $max_width;

                        $thumb_height = ceil($max_width * ($src_height / $src_width));

                    }

                    

                    $off_h = ($src_height - $src_width) / 2;

            

                }

    

                if (!@$destImage = imagecreatetruecolor($max_width, $max_height)) {

                    return false;

                }

        

                if (!@imagecopyresampled($destImage, $srcImage, 0, 0, 0, $off_h, $thumb_width, $thumb_height, $src_width, $src_height)) {

                    return false;

                }



            # thumbnail is square

             } else {

             

                if ($src_width > $src_height) {

                    $off_w = ($src_width - $src_height) / 2;

                    $off_h = 0;

                    $src_width = $src_height;

                } else if ($src_height > $src_width) {

                    $off_w = 0;

                    $off_h = ($src_height - $src_width) / 2;

                    $src_height = $src_width;

                } else {

                    $off_w = 0;

                    $off_h = 0;

                }



                if (!@$destImage = imagecreatetruecolor($max_width, $max_height)) {

                    return false;

                }

        

                if (!@imagecopyresampled($destImage, $srcImage, 0, 0, $off_w, $off_h, $max_width, $max_height, $src_width, $src_height)) {

                    return false;

                }



             }

         

                            

        }

        

        @imagedestroy($srcImage);



        if (!@imageantialias($destImage, true)) {

            return false;

        }

        

        if (!@imagejpeg($destImage, $thumbnail, $quality)) {

            return false;

        }

                        

        @imagedestroy($destImage);

        

        return true;

    }

tim dot daldini at gmail dot be
04-Oct-2007 12:57


Tim's function is a whole lot faster, however, the quality setting doesnt seem right since resizing very big images doesnt affect quality of the resulting thumbnails that much on quality 1 for example.



Anyone has figured out how to use a more correct quality setting by comparing image surfaces (for example) basing on Tim's function?



images with a total of 10Megapixels that contain 5Megapixels when resized should use the same quality setting like images that contain 1Megapixels but only 0.5 when resized.



Not hard to understand, but the memoryload would be a lot lower if the function could decide to use a setting of quality 1 automatically when resizing big images to small thumbnails. This would be handy especially when using the function for images of various sizes in the same application.

liviu dot malaescu at gmail dot com
26-Sep-2007 04:37


3800x2500px - 2s

3807x6768 - 4.7s 

Tested on a core2duo e4300/1gb ram - only one core used.

It reduces first with nearest-neighbour and then with bicubic on the smaller image. 

Thumb quality is fine :)



<?php

$cale_in = "test.jpg"; //input-file

$cale_out = "test_thumb.jpg"; //output-file

$make_thumbs = "YES";

$thumbsize[0] = 100;

$thumbsize[1] = 75;

ini_set("memory_limit", "134217728"); // needed for huge pictures



// Bicubic resampling, not written by me

function ImageCopyResampleBicubic 

(&$dst_img, &$src_img, $dst_x, $dst_y, $src_x, $src_y, $dst_w, $dst_h, $src_w, $src_h)  {

    ImagePaletteCopy ($dst_img, $src_img);

    $rX = $src_w / $dst_w;

    $rY = $src_h / $dst_h;

    $w = 0;

    for ($y = $dst_y; $y < $dst_h; $y++)  {

        $ow = $w; $w = round(($y + 1) * $rY);

        $t = 0;

        for ($x = $dst_x; $x < $dst_w; $x++)  {

            $r = $g = $b = 0; $a = 0;

            $ot = $t; $t = round(($x + 1) * $rX);

            for ($u = 0; $u < ($w - $ow); $u++)  { 

                for ($p = 0; $p < ($t - $ot); $p++)  {

                    $c = ImageColorsForIndex ($src_img, 

ImageColorAt ($src_img, $ot + $p, $ow + $u));

                    $r += $c['red'];

                    $g += $c['green'];

                    $b += $c['blue'];

                    $a++;

                }

            }

            ImageSetPixel ($dst_img, $x, $y, 

ImageColorClosest ($dst_img, $r / $a, $g / $a, $b / $a)); 

        }

    }

}



function makeThumb($cale_in)  {

    global $thumbsize;

    $sursa = imagecreatefromjpeg($cale_in);

    $is_jpeg = getimagesize($cale_in);

    $ws = $is_jpeg[0];

    $hs = $is_jpeg[1];

    if($ws > $thumbsize[0] && $hs > $thumbsize[1])

    {

        $aspect = $ws/$hs;

        if($aspect <= 1.333333)  {

            $hd = $thumbsize[1];

            $wd = floor($hd*$aspect);

        }

        else  {

            $wd = $thumbsize[0];

            $hd = floor($wd/$aspect);

        } 

        $Z = ceil(log(($ws*$hs)/(4*$thumbsize[0]*$thumbsize[1])))+1;

        if(log(($ws*$hs)/(4*$thumbsize[0]*$thumbsize[1])) < 0) $Z=1;

        $dx = $dy = 0;

        if($Z > 1) {

            $dest = imagecreatetruecolor(round($ws/$Z), round($hs/$Z));

            for($i=0; $i < $hs; $i+=$Z) {

                for($j=0; $j < $ws; $j+=$Z) {

                    $rgb = imagecolorat($sursa, $j, $i);

                    $r = ($rgb >> 16) & 0xFF;

                    $g = ($rgb >> 8) & 0xFF;

                    $b = $rgb & 0xFF;

                    $pcol = imagecolorallocate($dest, $r, $g, $b);

                    imagesetpixel($dest, $dx, $dy, $pcol);

                    $dx++;

                }

                $dx=0;

                $dy++;

            }

        }

        else 

        {

            $dest = imagecreatetruecolor($ws, $hs);

            imagecopy($dest, $sursa, 0, 0, 0, 0, $ws, $hs );    

        }

        imagedestroy($sursa);

        $destrs = imagecreatetruecolor($wd, $hd);

        ImageCopyResampleBicubic($destrs,$dest,0,0,0,0,

$wd,$hd,round($ws/$Z),round($hs/$Z));

        ImageJpeg($destrs, $cale_out, 100);    

        echo "Z:$Z <b>|</b> ($ws x $hs) -> ($wd x $hd) @ ".$ws/$hs;

    }    

}



function mf() {

    list($usec, $sec) = explode(" ", microtime());

    $x[0] = $sec;  $x[1] = $usec;

    return $x;

}



$timp1 = mf(); //starting to count

makeThumb($cale_in); //makes the actual thumb

$timp2 = mf(); //timer ends

$dsec = $timp2[0] - $timp1[0];

$dusec = $timp2[1] - $timp1[1];

echo "<b>|</b> Time : <b>".round($dusec+$dsec,6)."s</b> <b>|</b><br />";



?>

tim at leethost dot com
08-Sep-2007 01:25


Here's an improved and corrected version of my fastimagecopyresampled script.  Because I typically scale entire images it appears my previous code was not properly tested.  In any case, this new script has been thoroughly tested, cleaned up, and enhanced.  The code is a little tighter and quality values between 0 and 1 will yield a mosaic effect (basically lowering quality below the pervious lowest value of 1).  I would still suggest using a quality of 2 to 4 as that's the primary purpose of this script, which is high quality and fast results.  Don't be afraid of using a quality value of 1.5 for extreme cases where you have a bunch of very large images from digital cameras (like those 10M pixel cameras theses days) and creating thumbnails in batch mode.  Even a quality of 1.5 is a big improvement over imagecopyresized and is ultra-fast.



Anyway, enjoy and I hope this is the bug-free last version.



<?

function fastimagecopyresampled (&$dst_imag